TECHNICIAN AIDS
178
White Glazed
EGG INSULATOR
A very high-strength insulator made from
best quality steatite ceramic. Designed
with fully curved surfaces to prevent cut-
ting and chafing of wires.
No. J852
INSULATOR
These insulators are lightweight, durable molded tenite plastic. Dielectric
strength is comparable to its ceramic predecessor without susceptibility to
cracking or breakage under impact or severe temperature change,
Weatherproof.
No. 2130CP
Economy SOLDER WICK
Supplied on 5 ft. spool in .08 (2.0mm) width.
Extremely high absorption capacity.
No. HSW15
No. 10300 -
Kit
No. 10301 -
Polish #1
No. 10302 -
Polish #2
HEAT GUN
The Philmore No. HD866 is a dual range gun. The low range covers
500
o
F and the high range covers 900
o
F - 1100
o
F. This fine quality
product can be used for:
Heat shrink tubing
Paint removal
Drying metal
Drying ignition systems
Bending plastic/plexiglass
Window shrink films
Frozen locks
No. HD866
VACUUM SOLDER REMOVAL TOOL
Makes removal of molten solder from p.c. board easy. One hand
operation. Nose is removable for easy clean-out. All-metal construction
provides long, trouble-free service.
No. 10320
No. 10325
- Replacement Anti-Static Tip and O Ring
Atool for removing square I.C.s such
as CPUs, from their sockets without
damage. Grips PLCCs by opposite
corners; makes removal fast and very
easy. Safe for the I.C.
No. 10270
PLCC EXTRACTION TOOL
UL LISTED
117VAC
1100 Watts
Includes (2)
tips and tip
removal tool.
PLASTIC RESTORER
REFINISHING KIT
These products will work on Plexiglass
.
, Lexan
.
, Lucit
.
, UVEX
.
and
Acrylite
.
. Polish #1 will clear up most surface blemishes on meter
faces, etc. Polish #2 is for the truly bad situations; it actually removes
damage instead of filling it. These polishes are free of any offensive
odors and there is no toxic risk, The kit comes complete with handy
polishing cloth. Its great for instrument faces, plexiglass windows,
convertible rear windows, computer screens, copiers, safety goggles
and motorcycle windows.
I.C. EXTRACTION TOOL
Economical spring steel tool, one-piece construction, insulated, will
work on all I.C. devices from 8 pin to 24 pin.
No. 10230
ULTRA-CHEM Heatsink Compound Type II
Silicon FREE heat sink compound which will not migrate and meets MIL-C-
47113 properties. It is used in applications where contamination is a problem
such as wave soldering, and operates at a wider temperature range (-40
o
-
392
o
F)
ULTRA-CHEM Heatsink Compound
This heatsink compound contains silicone and is used to transfer heat away
from transistors and ICs for them to run cooler.
No.
50-819
2oz Tube
No.
50-820
3g Tube
ULTRA-CHEM Swabs
No.
50-850
4oz Tube
No.
50-150
Double Tipped 6 (100 pk)
No.
50-288
Chamois 3/8 X 3 1/2 (25 pk)