Logo Call:
414-327-1555
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.

Distributors for
TYTON HELLERMANN CORP.

Tyton Logo Pic

Networking and Protecting Products


Tyton Product Pic Tyton Hellermann's products for networking and protecting manage wire and cable in many ways. Extruded products for routing and protecting, along with equipment for Category 5 and other communications applications all complement each other for a full line of cable management products.

WIRING DUCT

Tyton Hellermann manufactures U.L. Recognized, CSA Certified wiring duct from high impact and rigid PVC for routing and protecting wire and cable. Solid, standard slotted and high density slotted channel wiring duct are the three styles available. With over 26 different sizes, Tyton Hellermann duct comes in standard colors of gray and white in 6 foot lengths. Black, brown and beige are available, based on minimum volume requirements. Tyton Hellermann PVC wiring duct carries a U.L. flame rating of 94 V-O.

Tyton Hellermann wiring duct covers are flush with the side of the duct, allowing for tight side by side placement. All wiring duct covers are provided with a non-slip plastic lining to ensure that the covers remain in place during vibration. Yet, they easily snap on and off, offering ready access to the wire run.

Solid Wall Duct

Solid wall duct is designed for straight wire runs where break-outs are not required.

Slotted Wall Duct

Standard slotted wall duct features break-away fingers which provide additional access for wire leads. Each section of the duct is provided with two score lines. The upper score line is used to break away fingers when a greater opening is required. The lower score line allows the sidewall to be smoothly cut for joints and "T's".

High Density Slotted Wall Duct

High density slotted wall duct comes with narrow fingers, equaling a 2 to 1 finger ratio compared to standard slotted wiring duct. The narrow fingers reduce fanning of the wires to the terminal blocks for a neater appearance and to accommodate more compact designs and components in control panels, communications closets, and other applications.

Tyton Hellermann's high density wiring duct is manufactured with a versatile mounting hole pattern which lines up with DIN 35 rail, as well as other mounting hole designs. The mounting hole rows are also consistent with Tyton Hellermann's standard slotted wiring duct, so the two ducts can be interchanged.

LIGHTGUIDE FIBER OPTIC ENCLOSURE SYSTEM

The Lightguide Fiber Optic Enclosure System is designed to route and protect fiber optic cable consisting of connectors and protective channel, the Lightguide Enclosure System prevents accidental cuts, kinks, and associated signal loss.

Consisting of more than 40 components in different sizes with various horizontal and vertical transitions the Lightguide Enclosure System offers a complete system for fiber optic protection.

The Connectors provide a 2" bend radius which ensures effective signal transmission while utilizing minimum space

Connectors contain an inside flange for cable retention during cover removals. The quick release velcro cover attachment provides fast and easy re-entry into the system without fiber pinching or additional hardware.

Complete lay-in capability allows ease of access to the cable.

SURFACE RACEWAY AND ACCESSORIES

Tyton Hellermann's surface raceway system is a one piece latching duct designed to contain, route and protect wire and cable when it is not feasible to run it within the wall. It is manufactured from a 94 V-0 PVC and features a superior adhesive which conforms to most any surface.

Designed with a flexible hinge, the raceway allows numerous openings without creating discoloration or stress cracking. The self-locking, hidden positive latch allows for quick re-entry as well as secure installation of wire and cable.

Featuring a low profile design, Tyton Hellermann's surface raceway is easy to cut and trim and is paintable with a latex based paint to fit any decor.

The raceway is available in three sizes: 3/4"W, 1-1/4"W, and 1-3/4"W, with a full range of fittings and accessories.

Accessories

Tyton Hellermann offers a wide range of fittings and accessories, including splice covers, tees, end caps, junction boxes and more.

One inch minimum bend radius accessories help ensure consistent data transmission performance of Category 5 communications systems. Cables within the raceway meet recommended bend radius requirements for Category 5 systems.

SURGE PROTECTION PRODUCTS

Tyton Hellermann surge protection products divert surges from the affected line to the ground, preventing the surge from reaching sensitive electronic equipment. Tyton Hellermann's Sector Protection Approach includes the SECTORMASTER, SECTORGUARD, AND SECTORSHIELD.

Sectormaster

The SECTORMASTER series offers the first line of defense against surges. It is designed for service entrance and main panel protection. This series reduces external transients to levels that are well within the tolerances of most electronic equipment.

Sectorguard

The SECTORGUARD is designed for use with computer workstations, LANS, copiers, facsimile machines, and other electronic equipment that requires special telecommunications interfaces. The SECTORGUARD module comes in three outlet wall mount or plug strip versions or a seven outlet plug strip.

A variety of optional communications protection modules can be easily snapped into place using the built-in interface port. This port, in addition to a wide variety of data, signal and telco modules, transforms Tyton Hellermann SECTORGUARD products into a fully integrated AC/Communications protection system.

The Category 5 module applied to the SECTORGUARD provides protection for any remote network. This snap-on module is UL Certified Category 5 and EIA/TIA compliant per specification TSB40-A.

Sectorshield

The SECTORSHIELD surge suppressors provide superior protection for communications lines. This series is a completely modular communications line protection system, providing an effective shield between uncontrolled transient environments and electronic systems. These modules can be utilized as either stand-alone devices or as building blocks to create an unlimited multipart network protection system.

CATAGORY 5 EQUIPMENT

Patch Panels

Tyton Hellermann modular, Category 5 patch panels simplify cross connections for both data and voice circuits. Available in 12, 24, 48, and 96 port versions, Tyton Hellermann patch panels are easily mounted in standard 19" racks. These patch panels are fully compatible with all categories of wiring to. 100 Mbps and conform to EIA/TIA-568 commercial wiring standard, including TSB40-A and Category 5 requirements.

Information outlets

Tyton Hellermann offers both Category 5 flush mount outlets and Category 5 surface mountable, micro outlets. The flush mount outlets offer snap-in inserts and connectors for installation versatility. The surface mount outlets feature a compact design and are available with-single, dual, triple, and quad 110 or Krone connectors.

Also available from Tyton Hellermann are a line of communications racks and accessories including shelves and wire management brackets.

TUBING, SPIRALWRAP, GROMMET AND ELECTRICAL TAPE

Other Tyton Hellermann products for protecting include nylon or polyethylene convoluted tubing, spiralwrap protective sheathing, flexiform grommet, and electrical tape in different thicknesses and materials.



© 1997 Tyton Hellermann


Bullet Bundling and Securing Products Bullet Clamping Products
Bullet Grip Ties VELCRO* Fastners Bullet Identifying Products
Bullet Terminating and Connecting Products Bullet Networking and Protecting Products
Bullet HOME PAGE Bullet TYTON MENU

Logo Call:
414-327-1555
Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.

© 2007 Industrial Electronics By Ross LLC