Welcome to Philmore Products

Call: 414-327-1555 Fax : 414-327-0577 Email: indelect@execpc.com Catalog, Quote, Availability.

DATAK PROTOBOARDS for quick and easy circuits.
Ideal for those "one only" circuits, pre-production prototypes etc. All DATAK Protoboards have copper on one side and matching printed pattern on the opposite side to make parts placement easy. Copper pads are drilled and ready to solder. These board are available in the less costly Phenolic substrate and with an FR-4 substrate for high frequency RF circuits.

Experimenter's general purpose mini-board. May be broken in two for smaller boards. Size: 1.8" x 3.6" Phenolic part no. 12-602 Fiberglas part no. 12-603	IC PROTOBOARD accommodates DIP IC's and may be broken into two smaller boards. Size: 1.8" X 3.6" Phenolic no. 12-607 Fiberglass no. 12-608
General Purpose small board with center power lands. Components may straddle the center conductors and connect to them for ground and power. Phenolic Part no. 12-611 Fiberglas Part no. 12-612	Medium PROTOBOARD size is 1.9" X 5.16" and large enough to accommodate circuits containing several IC's. Forty-five rows of holes are set up so that the IC's can straddle the center of the board and each IC pin has five pads to accommodate other components. Phenolic Part no. 12-617 Fiberglas Part no. 12-622
Large PROTOBOARD  4.30" x 5.50" board can accommodate some some very large projects: over 1900pad/holes on 110" centers will accommodate standard IC and passive component leads. Solder one side and the other side is indexed (printed) to the user to know where the solder patterns run. Phenolic Part no. 12-600 Fiberglass Part no. 12-601
Strip PROTOBOARDS (medium size) The "STRIP" refers to the the copper Strips that run full length on one side of the board. Mounting holes spaced on 1/10" centers will accept standard component leads. Strip can be broken into sections with your Xacto knife. Available only in Phenolic substrate. Size 3-15/16" X 6-5/16" Part no.   12-618 Phenolic board	Strip PROTOBOARDS (long) The "STRIP" refers to the the copper Strips that run full length on one side of the board. Mounting holes spaced on 1/10" centers will accept standard component leads. Strip can be broken into sections with your Xacto knife. Available only in Phenolic substrate. Size 3-15/16" X 9-5/16" Part no. 12-619

Use with any Philmore 86-series relay from 3 to 24 volts. May be soldered or use TB-132 or TB-133 Screw terminals which fit neatly into the Relay PC board if you need relays on temporary basis.
 

Jumper wire "PUSH-IN"
PROTOTYPE CIRCUIT BOARDS (NO SOLDERING)
For prototype design, testing and modification of circuits. These breadboards will accept the leads of nearly any electronic components (up to 0.032") in the 0.1" x 0.1" grid of solderless tie points, dual inline packages, or DIP’s such as I.C.’s plug in for very fast assembly and modification of circuitry. Solid wire jumpers plug in for interconnections. Contacts are a durable alloy with nickel plating; body is made of ABS polymer. Breadboards have indexing numerals on each row and column to speed assembly and eliminate errors. Ideal for the educator and in the designers lab also.

Part no. RH21	Part no. RH53
Part no. RH32	Part no. RH21B
Part no. RH74	Part no. SWS02 Wire kit contains several different lengths/colors of insulated wires. These are pre stripped and ready for insertion into any of the Solder-free boards in this group, and of course may be used with solder type boards as well. 22AWG copper hook-up wire; ten pieces of each color in storage box.

Call: 414-327-1555 Fax : 414-327-0577 Email: indelect@execpc.com Catalog, Quote, Availability.