Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.
|
Call: 414-327-1555 Fax : 414-327-0577 Email: indelect@execpc.com Catalog, Quote, Availability. |
This is the Seventh KITS page
(from page 205 in New 2003 Philmore catalog)
Positive Adjustable Power Supply Module Kit
Negative Adjustable Power Supply Module Kit
These two kits can be used separately; or assembled together to create a dual rail power supply. Current up to 1.5 ampere output. Both kits feature; reverse polarity protection, LED power "on" indicator, IC regulator, variable output voltage, low noise, AC or DC input and up to 37 volts output. Complete details for selecting a transformer (transformer is not included; you must supply input voltage of 3 volts more than desired output) are included. A thorough description of assembly options is included with each kit.
NO. 80-124- Positive Adjustable Power Supply Module kit
No.
80-125 -Negative Adjustable Power Supply Module kit
ATMEL® microcontroller Programmer kit.
(PHOTO SHOWS BOARD ONLY)
The kit is a complete and powerful programmer for the ATMEL 8051
family of microcontrollers. This
series of ATMEL devices uses flash memory to store programs; Which means that
they are electronically erased/programmed without need of a U/V eraser. The
89(L)S8252 chips even have EEPROM which can also be programmed with this kit.
The programmer supports the following ATMEL devices 89C1051, 89C3051, 89C4051,
89C51 89LV52, 89C55, 89LV55, 89S8252, 89LS8252,,,89S53,8953. Programmer automatically
reads a chip’s signature bytes so that you may just plug in any of the series
and go!. Device instructions and all ATMEL device fuse and lockbites are also
programmable with this Programmer. USE: Connects to the RS232 serial port of
any PC. Connect using any terminal emulator program capable of ASCII text file
transfer, such as Windows terminal, Windows 95/98 Hyperterminal or DOS Texix,
ProComm etc.. A simple DOS terminal program which we use TERM.EXE is a free
download. Power: 16VDC use an unregulated 12V 150mA wall adaptor which will
put out about 16VDC when no load. (Data sheets for all this series of ATMEL
devices may be found at the ATMEL web site. )
NO. 80-123 ATMEL® microcontroller Programmer kit.
Mini-VOX & Relay Kit (Sound Activated
Switch)
For the uninitiated, VOX = Voice Activated Switch. This is a switch (relay) that may be activated with any sound, including the human voice. A very sensitive circuit that may be adjusted to react to very low volume sounds or a yell or hand clap. While a VOX is often used to activate a sound recorder, it may be used to trigger an alarm (the mike easily picks up vibrations in windows, wall or door), activate a video camera, radio transmitter or simply turn on a light. The relay will release after a few seconds of silence, holding as long as sound continues. (hold time may be changed up to 30 seconds) Operates on 12V DC and very low current.
No. 80-126 Mini-VOX Relay kit.
4 digit UP/DOWN COUNTER Kit
The kit is a low cost counter, counting from 0000 to 9,999 or down from 9,999 to 0000. The overflow output pulses low when the count wraps to zero; so, two counters could be connected together to make an eight digit counter. The clock input is debounced to prevent problems when using external mechanical switches. Operation on anywhere from 9 to 15 volts DC and 20 to 40 mA (depends upon how many display segments are lighted). The AT90s1200 is preprogrammed; builder is not required to program anything. There are five pairs of pins for external connections: RESET, CLOCK, DOWN, DISABLE, OVERFLOW. A Down connections sets the unit to count down. A Disable prevents counting at all; Resets sets the counter at zero (0000), Overflow outputs a pulse low when the counter reaches 0000. The Clock contact will pulse a ‘count’, and each time a switch connected to Clock is ‘on’ the unit increments a digit. The maximum speed of counting is a bit more than thirty (30) per second. The display is red LED digital 0.6" high.
No. 80-129 4 digit UP/DOWN COUNTER
Sound Activated Switch for Tape Recorder (VOX Switch)
(Only the PC board is shown, all parts are included. Click for
larger Photo)
Turn on any tape recorder that has a remote on/off
jack (most cassettes). The circuit has a feed back and delay circuit for robust
operation. You could add a relay for switching heavy loads; and tape recorders
are not the limit. How about turning on lights via voice or a whistle? Circuit
switches off after six seconds of silence.
No. 80-130 Sound Activated Switch
kit.
Personal Computer Controlled LCD & Thermostat
The LCD screen is just a bonus; you may program it to say about
anything, fed from a personal computer. A more interesting use for this kit
is the thermostat function. The board may be programmed and then disconnected
from the PC to function as a standalone thermostat. Set a high and low temperature
and outputs may be used to switch external devices, such as relays controlling
heaters or coolers, open windows, etc. Readout may be in Fahrenheit or Celsius.
Software is included and detailed instructions for use. The Kit uses the DS1620
chip from Dallas Semiconductor. The chip measures -55o - 125o C (- 67o - 257o
F). You will need a small ‘wall-wart’ style power supply to provide 12V DC (at)
50mA or so.
No. 80-134 LCD & Thermostat Kit
Back to Kits Index page HERE
|
Call: 414-327-1555 Fax : 414-327-0577 Email: indelect@execpc.com Catalog, Quote, Availability. |