Distributors for FLUKE METERS CLAMPS AND ACCESSORIES

Industrial Electronics Distributor of Fluke Current Clamp Call: 414-327-1555

Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.

Accessories

Fluke Current Clamp Multimeter Accessories


Fluke Current Clamps Extend the value of your DMM with a current clamp. A clamp accesssory leverages the accuracy and precise measurement capabilities of your DMM to deliver fast, accurate, current measurements.

Fuke Model NameFluke Current Clamp Multimeter Accessories Description
80i-110s AC/DC Current Clamp Fluke Current ClampThe 80i-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
More Info...
80i-400 AC Current Clamp Fluke Current ClampThe model 80i-400 is a clamp-on ac current probe designed to extend the current measuring capability of an ac current meter to 400 amperes. The clamp is compatible with a DMM that accepts 4mm-shrouded banana plugs and has an AC milliamp range. The division ratio is 1000:1.
More Info...
80i-500s AC Current ClampFluke Current ClampCurrent clamp for capturing current waveforms with Fluke ScopeMeter test tools, Fluke Power Quality Analyzer and Scopes. Enhanced safety by using double or reinforced insulation for probe jaws, handle, output cable and BNC connector (rated to 600Vrms).
More Info...
80i-600A AC Current Clamp Fluke Current ClampMeasures ac current from 1A to 600A. Output to meter is 1mA/Amp ac. (Division ratio is 1000 to 1.) Maximum conductor size 2" (50 mm) in diameter. New straight, safety-shrouded plugs. Accuracy: ¤2%, 50 Hz to 1 kHz, ¤3% (typical) 30 Hz to 50 Hz or 1 kHz to 10 kHz. (Factory Mutual Approved)
More Info...
90i-610s AC/DC Current Clamp Fluke Current ClampThe 90i-610s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope ,Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter a BNC to banana plug adapter PM9081/001 (included) lets you use this probe with your DMM.
More Info...
CS20MA Current Shunt The CS20MA Current Shunt in intended for use with any of the Scopemeter test tools for ac and dc measurements on 4-20 mA Process Control Loops.
More Info...
i1000s Current Clamp Fluke Current ClampThe Fluke model i1000s is a portable 1000 Arms oscilloscope probe intended for use in industrial and power environments. The unit permits analysis and measurement of current waveforms and harmonics. Millivolt output proportional to current magnitude allows for direct display of the waveform on an oscilloscope via a coaxial cable terminated with an insulated BNC connector.
More Info...
i1010 AC/DC Current ClampFluke Current ClampThe i1010 AC/DC Current Clamp allows multimeters to measure up to 600A AC or 1000A DC.
More Info...
i1010-KIT AC/DC Current Clamp and Carry Case KitFluke Current Clamp Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.

Included with kit:
  • i1010 1-600A AC rms, 1-1000A DC Current Clamp
  • Zippered vinyl carry case with moveable divider
    More Info...
  • i200 AC Current Clamp Fluke Current ClampSmall sized, convenient-to-use current clampThe i200 is a single range 200A ac current clamp with current output via safety shrouded banana plugs. The i200 is compatible with any Fluke multimeter or any other current measurement device that accepts shrouded banana plugs and has a milliamp range.
    More Info...
    i2000flex AC Current Clamp Fluke Current ClampFor current measurement on large and difficult to reach conductorsThe i2000flex is a flexible ac current probe for oscilloscopes and digital multimeters recommended for current measurement on large and difficult to reach conductors or grouped cables.
  • Current Range: 2A to 2000A AC
  • Basic Accuracy 48Hz to 65Hz: +/- 1% of full scale
  • Output Signal: 200A range 100mV/A, 2000A range 10mV/A
  • Bandwidth: 1Hz to 20kHz
  • Working Voltage: 600V AC rms
  • Maximum Conductor Size: 17 cm (6.75 inch) diameter
  • Safety Rating: EN61010, CAT III 600V
    More Info...
  • i200S AC Current ClampFluke Current ClampSmall sized, convenient-to-use current clampThe i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.
    More Info...
    i3000s AC Current Clamp Fluke Current ClampCurrent measurements on large conductorsThe i3000s AC current probe works with oscilloscopes and digital multimeters. The included dual banana to BNC adapter PM9081/001 allows for the clamp to interface with digital multimeters. The clamp is optimized for measurement on power distribution systems. The i3000s is compatible with Fluke Scopemeter test tool, Power Harmonic Analyzer, and Oscilloscopes.
    More Info...
    i410 AC/DC Current Clamp Fluke Current ClampThe i410 AC/DC Current Clamp allows multimeters
    to measure up to 400A AC or DC.
  • Current Range: 1A to 400A AC / DC
  • Basic Accuracy DC or 45Hz to 400Hz: +/- (3.5% of reading +0.5A)
  • Output Signal: 1mV/A AC/DC
  • Frequency Range: 45Hz to 400Hz
  • Bandwidth: 3kHz
  • Working Voltage: 600V AC rms
  • Maximum Conductor Size: one 30 cm (1.18 inch) or two 25mm (0.98inch) diameter
  • Safety Rating: EN61010, CAT III 600V
    More Info...
  • i410-KIT AC/DC Current Clamp and Carry Case KitFluke Current ClampSpecial value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.
    Included with kit:
  • i410 1-400A AC rms, 1-400A DC Current Clamp
  • Zippered vinyl carry case with moveable divider
    More Info...
  • CS20MA Current shunt 4-20mA More Info...


    © 2007 Fluke Current Clamp and Power Probe Accessories by Industrial Electronics By Ross LLC
    Fluke Current Clamp Fluke Digital Multimeters Fluke Current Clamp Fluke Clamp Multimeters Fluke Current Clamp Fluke Graphical Multimeters
    Fluke Current Clamp Fluke Accessories Fluke Current Clamp Fluke Application Note 1 Fluke Current Clamp Fluke Application Note 2
    Fluke Current Clamp HOME PAGE Fluke Current Clamp Fluke Application Note 3 Fluke Current ClampFluke Application Note 4
    Fluke Current Clamp Fluke MENU

    Industrial Electronics Distributor of Fluke Current Clamp Call: 414-327-1555

    Fax : 414-327-0577
    Email: indelect@execpc.com
    Catalog, Quote, Availability.
    © 1995-2007 Industrial Electronics By Ross LLC
    ©2003-2006 SEO by synscon.com
    Search Engine Marketing Company
    Industrial Electronics Distributor of Fluke Current Clamp Industrial Electronics Distributor of Fluke Current Clamp Industrial Electronics Distributor of Fluke Current Clamp