Distributors for FLUKE METERS CLAMPS AND ACCESSORIES

industrial electronics Distributors of Fluke 110 Series Call: 414-327-1555

Fax : 414-327-0577
Email: indelect@execpc.com
Catalog, Quote, Availability.

Fluke 110 Series Digital Multimeters


Introduction | Features | Specifications | Accessories and Ordering Information

fluke 10

Sometimes Smaller is Better

Introducing the 110 Series of digital multimeters. Totally new. Totally Fluke.

Want to compare sizes? These little meters pack more features than some DMMs twice their size. True-rms ac voltage and current readings, for example. 6000 count resolution. Min/Max/Average. And frequency and capacitance capabilities. Plus they give you an easy-open battery access door. They’re all CAT III rated for 600V and are protected by a three-year warranty. The 112 model has a backlight and delivers 0.7% basic dc accuracy. The price? They’re less than you think. Yes, smaller is better. Definitely. Pick one up at your


fluke 10

Features

  • Online Warranty Registration
  • True-rms ac voltage and current (Model 111 and 112) for accurate readings on all waveforms
  • 6000 count display provides improved resolution
  • Min/Max/Average recording
  • Frequency, capacitance & resistance capabilities
  • 112 has a backlight to illuminate the screen in dark workspaces
  • Easy access battery door to change the battery without breaking the calibration seal
  • Drop protected to 1 meter
  • Holster with probe holders for better test lead management
  • Compatible with ToolPak? magnetic hanging kit
  • Compact & lightweight for use on the go
  • IEC CAT III 600V safety rating
  • 3-year warranty


  • Note: The Fluke 10 and 12 meters are still available.

    Fluke 110 Series Specifications

    General Specifications
    AC Amps*

    Range: 3.00A to 10.00A
    Accuracy: ± (1.5% of reading plus 3 counts) Not specified below 3A
    Crest Factor: Ł3
    AC Response: 50 Hz to 500 Hz

    DC Amps*

    Range: 0.001A to 10.00A (20A overload for 30 seconds)
    Accuracy:± (1.0% of reading plus 3 counts)

    AC Volts

    Range: 300 mV to 600.0V rms
    Accuracy: ± (1.0% of reading plus 3 counts)
    AC Response: 50 Hz to 500 Hz

    DC Volts Range: 1 mV to 600.0V
    Accuracy: ± (0.7% of reading plus 2 counts)
    Ohms

    Range: 0.1W to 40.00 MW
    Best Accuracy: ± (0.9% of reading plus 1 count)

    Capacitance Range: 1 nF to 9999 µF
    Best Accuracy: ± (1.9% of reading plus 2 counts)
    Continuity Beeper guaranteed on <20 W, guaranteed off >250W; detects opens or shorts of 250 µs or longer
    Frequency

    Range: Voltage Input - 5 Hz to 50 kHz
    Current Input - 50 Hz to 5 kHz (111 and 112 only)
    Accuracy: ± (0.1% of reading plus 2 counts)

    Note The 110 Series is not recommended for use with AC current clamps. 170 and 180 series DMMs are recommended for use with AC clamp accessories.

    Fluke 110 Series Models, Options & Accessories

    These accessories are compatible with model: Fluke 110 Series Digital Multimeters
    Accessory Type Model Name Accessory or Option Description Pricing
    Automotive  TL28A  63" Alligator Clip Test Lead Set  Call 
    Cases & holsters  C90  Soft Case DMM  Call 
    TPAK  Meter Hanging Kit  Call 
    C100  Universal Carrying Case  Call 
    C12A  Soft Case  Call 
    C50  Compact Soft Case  Call 
    C510  Leather Meter Case  Call 
    C530  Leather Accessory Case   Call 
    C550  Tool bag  Call 
    Fiber Optic  FOM  Fiber Optic Meter accessory with 9 V battery (installed) and instruction sheet.
    NOTE:
    Two fiber optic patch cables, a fiber optic coupler, a light source and a DMM are also required to operate, but sold separately. 
    Call 
    High Voltage Probes  80K-40  High Voltage Probe   Call 
    80K-6  High Voltage Probe  Call 
    Pressure & Vacuum  PV350  Pressure Vacuum Module  Call 
    Temperature  80TK  Thermocouple Module  Call 
    80T-150U  Universal Temperature Probe  Call 
    80T-IR  Non-Contact Infrared Temperature Probe  Call 
    Test Leads, Probes and Clips  AC220  SureGripTM Alligator Clips   Call 
    AC280  SureGripTM Hook Clips   Call 
    AC283  SureGripTM Pincer Clips   Call 
    AC285  SureGripTM Alligator Clips   Call 
    TL220  Industrial Test Lead Set   Call 
    TL221  SureGripTM Silicone Test Lead Extension Kit Ordering Information Model   Call 
    TL222  SureGripTM Silicone Test Leads (right to right)   Call 
    TL223  Electrical Test Lead Set   Call 
    TL224  SureGripTM Silicone Test Leads (straight to right)   Call 
    TP220  SureGripTM Industrial Test Probes   Call 
    85RF  High Frequency Probe   Call 
    BP980  Double Banana Plug Kit  Call 
    H900  Test Lead Holder  Call 
    TL 40  Retractable Tip Test Lead Set   Call 
    TL26A  60" 5-Way Test Lead Set  Call 
    TL74  4 mm Diameter Test Leads  Call 
    TL910  Electronic Test Probes with Replacement Tips  Call 
    TL930  61 cm (24') Patch Cord   Call 
    TL932  91 cm (36") Patch Cord  Call 
    TL935  Patch Cord Kit  Call 
    TL940  Mini-Hook Test Leads  Call 
    TL950  Mini-Pincer Test Leads   Call 
    TL960  Micro-Hook Test Leads  Call 
    TL970  Hook and Pincer Kit  Call 
    TP912  Replacement Tips for Electronic Test Probes (TL910)  Call 
    TP920  Test Probe Adapter Kit  Call 


    © 2007 industrial electronics Distributors of Fluke 110 Series


    fluke 10 Fluke Digital Multimeters fluke 10 Fluke Clamp Multimeters fluke 10 Fluke Graphical Multimeters
    fluke 10 Fluke Accessories fluke 10 Fluke Application Note 1 fluke 10 Fluke Application Note 2
    fluke 10 HOME PAGE fluke 10 Fluke Application Note 3 fluke 10Fluke Application Note 4
    fluke 10 Fluke MENU

    industrial electronics Distributors of Fluke 110 Series Call: 414-327-1555

    Fax : 414-327-0577
    Email: indelect@execpc.com
    Catalog, Quote, Availability.
    © 1995-2007 Industrial Electronics By Ross LLC
    ©2003-2006 SEO by synscon.com
    Search Engine Marketing Company
    fluke 10 fluke 10 fluke 10